Voltcraft AM-60X46/100MA/DC データシート

The analogue panel meters are designed for installation in switch cabinets or display panels 

and are only suitable for DC/DC voltage measurements. The installation occurs directly without 

external components; appropriate pre-resistors are already integrated in the circuit. Only in 

integrated status they may be put into operation. The suitable regulations are to be observed. 

The fixed measuring instruments are available with different measurement ranges. The scale 

needle can be adjusted precisely with the front screw.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use 

the product for purposes other than those described above, the product may be damaged. 

In addition, improper use can cause hazards such as short circuiting, fire, electric shock etc. 

Read the instructions carefully and keep them. Make this product available to third parties 

only together with its operating instructions.
This product complies with the statutory national and European requirements. All company 

names and product names are trademarks of their respective owners. All rights reserved.

•  Meter

•  Mounting material

•  Operating instructions

warranty/guarantee.
a) Persons / Product
•  The device must not be used in damp interiors or outdoors in the open air.
•  The fixed measuring instrument must not be used for medical purposes.
•  The fixed measuring instrument may only be used in voltage ranges  

<75 V/DC. Observe the technical data for this!

•  Be especially cautious in dealing with voltage >35 V/DC. Already at this voltage 

you can get a life-threatening electric shock when touching electric lines.

•  De-energise the electric system before installing the measuring instrument.
•  The device is not a toy. Keep it out of the reach of children and pets.
•  Do not leave packaging material lying around carelessly. These may become 

dangerous playing material for children.

•  Protect the product from extreme temperatures, direct sunlight, strong jolts, high 

humidity, moisture, flammable gases, vapours and solvents.

•  Do not place the product under any mechanical stress.
•  If it is no longer possible to operate the product safely, take it out of operation and 

protect it from any accidental use. Safe operation can no longer be guaranteed if 

the product:

 - is visibly damaged, 
 - is no longer working properly, 
 - has been stored for extended periods in poor ambient conditions or 
 - has been subjected to any serious transport-related stresses.

•  Please handle the product carefully. Jolts, impacts or a fall even from a low height 

can damage the product.

•  Also observe the safety and operating instructions of any other devices which are 

connected to the product.

b) Miscellaneous
•  Consult an expert when in doubt about operation, safety or connection of the 

device.

•  Maintenance, modifications and repairs are to be performed exclusively by an 

expert or at a qualified shop.

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). 
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing 

systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the technical status at the 

time of printing. 

If you are not sure about the correct connection or use, or if questions arise which are not 

covered by these operating instructions, please do not hesitate to contact our technical 

support or another qualified specialist.

At the scale’s face different symbols are attached, that have the following significance:

  Installation position vertical

Accuracy class related to the scale 

end value

Direct voltage/-current (DC)

Moving coil instrument

Mount the measuring instrument with the assembly material included in a pre-assembled 

rectangular front panel opening. Carefully attach the fixed measuring instrument. You can get 

the corresponding dimensions (in mm) from the following sketch. 

60.5

46.5

8.7 6.0

16.3

31.0

ø38.0

ø 2.0

ø 2.0

ø 2.0

ø 2.0

32.0

16.0

15.5

Connection of the voltage measuring instruments is done by means of parallel connection. 

Connection of the current measuring instruments is done by means of series connection. 

Connect the fixed measuring instrument to the two screw terminals on the back.

Electronic devices are recyclable waste and must not be disposed of in the 

household waste.
At the end of its service life, dispose of the product according to the relevant 

statutory regulations.

103536

100 mA/DC

0.1 Ω

Ampere

103537

100 µA/DC

2.7 kΩ

Ampere

103538

1 mA/DC

210 Ω

Ampere

103539

1 A/DC

0.1 Ω

Ampere

103541

3 A/DC

0.1 Ω

Ampere

103542

5 A/DC

0.1 Ω

Ampere

103544

15 A/DC

0.1 Ω

Ampere

103078

15 V/DC

20 kΩ

Volt

103079

30 V/DC

36 kΩ

Volt

Movement .............................  Moving  coil
Accuracy class ......................  2.5
Installation-Ø ........................  38  mm
Operating conditions .............  -25 to +55 °C, 20 – 95 % RH (non-condensing)
Storage conditions ................  -40 to +70 °C, 20 – 95 % RH (non-condensing)
Weight ..................................  approx. 44 g