Philips Hair clipper QC5070/00 QC5070/00 データシート

battery at an official collection point for batteries. If you have trouble 

removing the battery, you can also take the appliance to a Philips service 

centre, which will remove the battery for you and will dispose of it in an 

environmentally safe way.

Only remove the battery if it is completely empty.

 1 

 Disconnect the appliance from the mains and let the appliance run 

until the motor stops.

 2 

 Push the middle part of the cutting unit upwards with your thumb 

until it opens and then pull it off the appliance (Fig. 10).

Be careful that the cutting unit does not fall to the floor.

 3 

 Remove the upper housing part from the inner part of the 

appliance by means of a screwdriver (Fig. 15).

 4 

 Separate the lower housing part from the appliance (Fig. 16).

 5 

 Remove the result indicator from the appliance (Fig. 17).

 6 

 Remove the battery by prying it out of the appliance (Fig. 18).

 7 

 Cut the wires and dispose of the battery in an environmentally safe 

way.

Do not connect the appliance to the mains again after it has been 

opened.

If you need information or if you have a problem, please visit the Philips 

website at www.philips.com or contact the Philips Customer Care 

Centre in your country (you find its phone number in the worldwide 

guarantee leaflet). If there is no Customer Care Centre in your country, 

go to your local Philips dealer or contact the Service Department of 

Philips Domestic Appliances and Personal Care BV.

11