Philips Hair clipper QC5070/00 QC5070/00 データシート

After the appliance has been charged for the first time, do not recharge it 

between clipping sessions. Continue using it and recharge it only when 

the battery is (almost) empty.

 - Discharge the battery completely twice a year by letting the motor 

run until it stops.

 - Do not keep the appliance plugged into a wall socket all the time.

 - If the appliance has not been used for a long time, it must be 

recharged for 8 hours (NiCd battery) or 12 hours (NiMh battery).

Do not run the appliance from the mains when the battery is fully 

charged.

 

, To use the hair clipper connected to the mains: switch the hair 

clipper off, connect it to the mains and wait a few seconds before 

switching it on.

 

, The hair length after cutting is indicated in millimetres on the result 

indicator (Fig. 5).

 

, The hair length after cutting is only visible when one of the combs 

is attached. Use the small comb for a length of 3-21 mm and use 

the large comb for a length of 23-41 mm.

 1 

 Slide the comb attachment into the guiding grooves of the 

appliance (‘click’) (Fig. 6).

Make sure that the arms of the comb attachment have been properly slid 

into the grooves on both sides.

 2 

 Set the comb to the desired hair length by turning the length 

lock (Fig. 7).

The small comb cuts hair to a length of 3mm, 6mm, 9mm, 12mm, 15mm, 

18mm or 21mm.

8