Philips C240P4QPYEW C240P4QPYEW/27 データシート

製品コード
C240P4QPYEW/27
ページ / 53
39
7. Regulatory Infomation
Information for U.K. only
WARNING - THIS APPLIANCE MUST BE 
EARTHED.
Important:
This apparatus is supplied with an approved 
moulded 13A plug. To change a fuse in this type 
of plug proceed as follows:
1.  Remove fuse cover and fuse.
2.  Fit new fuse which should be a BS 1362 
5A,A.S.T.A. or BSI approved type.
3.  Retit the fuse cover.
,IWKHÀWWHGSOXJLVQRWVXLWDEOHIRU\RXUVRFNHW
outlets, it should be cut off and an appropriate 
SLQSOXJÀWWHGLQLWVSODFH
If the mains plug contains a fuse, this should 
have a value of 5A. If a plug without a fuse is 
used, the fuse at the distribution board should 
not be greater than 5A.
NOTE: The severed plug must be destroyed 
to avoid a possible shock hazard 
should it be inserted into a 13A socket 
elsewhere.
(A)
(B)
How to connect a plug
The wires in the mains lead are coloured in 
accordance with the following code:
BLUE -“NEUTRAL”(“N”)
BROWN -“LIVE”(“L”)
GREEN&YELLOW -“EARTH”(“E”)
1.  The GREEN&YELLOW wire must be 
connected to the terminal in the plug 
which is marked with the letter "E" or by 
the Earth symbol or coloured GREEN or 
GREEN&YELLOW.
2.  The BLUE wire must be connected to the 
terminal which is marked with the letter 
"N" or coloured BLACK.
3.  The BROWN wire must be connected 
to the terminal which is marked with the 
letter "L" or coloured RED.
Before replacing the plug cover, make certain 
that the cord grip is clamped over the sheath of 
the lead - not simply over the three wires.
㧊ٻ ₆₆⓪ٻ Ṗ㩫㣿ڃڝ ڄٻ 㩚㧦䕢ٻ 㩗䞿ٻ ₆
₆⪲㍲ٻ㭒⪲ٻṖ㩫㠦㍲ٻ㌂㣿䞮⓪ٻộ㦚ٻ⳿
㩗㦒⪲ٻ 䞮Ⳇڇٻ ⳾✶ٻ 㰖㡃㠦㍲ٻ ㌂㣿䞶ٻ 㑮ٻ
㧞㔋┞┺ډ