Elitegroup 945GCT-M3 ユーザーズマニュアル

36

Using BIOS

These items define critical timing parameters of the motherboard. You should leave
the items on this page at their default values unless you are very familiar with the
technical specifications of your system hardware. If you change the values incor-
rectly, you may introduce fatal errors or recurring instability into your system.

: Move   Enter: Select      +/-/PU/PD:Value     F10:Save     ESC:Exit   F1: General Help

DRAM Timing Selectable

[By SPD]

CAS Latency Time

[Auto]

DRAM RAS# to CAS# Delay

[Auto]

DRAM RAS# Precharge

[Auto]

Precharge delay (tRAS)

[Auto]

System Memory Frequency

[Auto]

SLP_S4# Assertion Width                              [1 to 2 Sec.]
System BIOS Cacheable

[Disabled]

Video BIOS Cacheable

[Disabled]

Phoenix-AwardBIOS CMOS Setup Utility
          Advanced Chipset Feature

Item Help

        Menu Level

PEG/Onchip VGA Control

                        [Auto]

PEG Force X1

                        [Disabled]

On-Chip Frame Buffer Size                         [8MB]
DVMT Mode

                        [DVMT]

DVMT/FIXED Memory Size                          [128MB]
Boot Display

                         [Auto]

F5:Previous Values         F6:Fail-Safe Defaults        F7:Optimized Defaults

** VGA Setting **

The value in this field depends on performance parameters of the installed memory
chips (DRAM). Do not change the value from the factory setting unless you install
new memory that has a different performance rating than the original DRAMs.

Press <Esc> to return to Advanced BIOS Features screen.

APIC Mode (Enabled)
This item allows you to enable or disable the APIC (Advanced Programmable
Interrupt Controller) mode. APIC provides symmetric multi-processing (SMP) for

systems, allowing support for up to 60 processors.

This item is only required if you have installed more than 64 MB of memory and
you are running the OS/2 operating system. Otherwise, leave this item at the

default.

Set this item to the default if your are running a system with no floppy drive and using
Windows 95; this ensures compatibility with the Window 95 logo certification.

Users may set a delay from 1 to 15 seconds in the cold boot process. Some hard disk
drives need extra time to spin up in order to identify correctly. If the system does not
start after the memory test, try to add times in this field.