Harbor Freight Tools 6 in. Compact Palm Polisher 製品マニュアル
Page 8
For technical questions, please call 1-800-444-3353.
Item 90219
SAFET
y
Op
ERA
TION
ERA
TION
M
AINTENAN
c
E
SETU
p
p
Specifications
Electrical Rating
120V~ / 60Hz / 0.7A
No Load Speed
3,500 OPM
Max. Accessory Diameter 6″ (152 mm)
Setup - Before Use:
Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
Functions
Terry cloth
Waxing Bonnet
Synthetic Fleece
polishing Bonnet
power
Switch
power
cord
pad
Operating Instructions
Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Workpiece and Work Area Set Up
1. Designate a work area that is clean and well-lit.
The work area must not allow access by children
or pets to prevent distraction and injury.
2. Route the power cord along a safe route
to reach the work area without creating a
tripping hazard or exposing the power cord to
possible damage. The power cord must
reach the work area with enough extra length
to allow free movement while working.
3. Secure loose workpieces using a vise or clamps
(not included) to prevent movement while working.
4. There must not be hazardous objects, such
as utility lines or foreign objects, nearby that
will present a hazard while working.
5. You must use personal safety equipment including,
but not limited to, ANSI-approved eye and hearing
protection, as well as heavy-duty work gloves.
4005664