Harbor Freight Tools 1_9/16 in. 8.5 Amp Heavy Duty SDS Max Type Variable Speed Rotary Hammer 製品マニュアル

Page 9

Item 69334

        

 The Auxiliary Handle can be placed in a variety of positions.
To adjust the Auxiliary Handle, turn the Handle counterclockwise to 

loosen the band. Slide the Handle to the desired position then turn 

the Handle clockwise to secure it in place.

Adjust the Mode Selector to the desired function 

before using the Rotary Hammer. Press the Release 

Button and rotate the Mode Selector until it clicks in 

place with the desired function at the Indicator. 

CAUTION: Move the Mode Selector only when the Motor is stopped. 

Attempting to move the Mode Selector while the Motor is engaged 

will result in abrupt bit rotation and can cause property damage.

CAUTION: When moving the Mode Selector, make sure it 

clicks into the desired position. If not actively engaged, the 

Mode Selector could slip out of position resulting in tool damage.

To Hammer/Drill: Rotate the Mode Selector to 

the Hammer/Drill setting. The Rotary Hammer 

will revolve and hammer when powered.

To Chisel: Rotate the  Mode Selector to the Hammer Setting. 

The Rotary Hammer will hammer when powered.

To Adjust Chisel Angle: Rotate the Mode Selector to the Adjust Chisel Setting. You 

can now rotate the bit  to the desired angle for chiseling. When finished adjusting the 

bit, rotate the Mode Selector to the Hammer Setting to begin chiseling.

1.  Designate a work area that is clean and well-

lit.  The work area must not allow access by 

children or pets to prevent distraction and injury.

2.  Route the power cord along a safe route to reach 

the work area without creating a tripping hazard or 

exposing the power cord to possible damage.  The 

power cord must reach the work area with enough 

extra length to allow free movement while working.

3.  Secure loose work pieces using a vise or clamps 

(not included) to prevent movement while working.

4.  There must not be objects, such as utility lines, 

nearby that will present a hazard while working.

Auxiliary Handle

Band

Bracket

Release Button

Adjust Chisel Setting

Indicator

Hammer 

Setting

Hammer/

Drill Setting