Sterling Home Theater Server XXX10-80 ユーザーズマニュアル
10-Pump, 80-Station Controller Chapter 3: Installation
48
2. Touch Operator Password or Setup Password, as appropriate.
A keypad pops up.
3. Enter up to eight (8) alpha-numeric characters. If you want to remove the password
protection, simply leave the entry blank. Use
← to erase any mistakes. Use ↵ to enter
the value.
The keypad disappears and the new setting appears under Operator (or Setup)
Password
Password
. In addition, if you have added a password, a new button appears on the
screen, labeled Log Off Operator.
If desired, you can also change the duration for which a password remains effective. During
operation, the password-protected screens are available either until the user logs off or until
this time elapses, whichever comes first. This feature prevents the password from remaining
active if a user forgets to log off.
operation, the password-protected screens are available either until the user logs off or until
this time elapses, whichever comes first. This feature prevents the password from remaining
active if a user forgets to log off.
4. The password timer starts when the user logs on. It expires even if the user is actively
using the screens when the chosen time is up. If the timer expires, the system goes to
the Station Status screen. Your password duration should be long enough to allow
authorized users to complete their tasks but short enough to provide adequate
protection against tampering.
the Station Status screen. Your password duration should be long enough to allow
authorized users to complete their tasks but short enough to provide adequate
protection against tampering.
To change the duration of a password:
1. At the System Setup screen, touch Operator Password Duration or Setup
Password Duration
, as appropriate.
A keypad pops up, with an entry of the current setting.
2. Enter the number of minutes (range: 2–99). Use
← to erase any mistakes. Use ↵ to
enter the value.
The keypad disappears and the new setting appears under Operator (or Setup)
Password Duration
Password Duration
.
Save/Restore Settings
To save settings, go to the System Setup screen and touch Save/Restore on the right
side of the screen. Touch Save Settings. When the settings have been saved, the
controller will display “Save Complete.” The date and time will appear under “Restore
Settings.”
To save settings, go to the System Setup screen and touch Save/Restore on the right
side of the screen. Touch Save Settings. When the settings have been saved, the
controller will display “Save Complete.” The date and time will appear under “Restore
Settings.”
To restore old settings, touch Save/Restore. Touch Restore Settings. The
controller will display the most recent date and time that the settings were restored.
controller will display the most recent date and time that the settings were restored.