Sentry Industries PT22 ユーザーズマニュアル
The following commands usese the outlets’ descriptive names to add outlets DataServer_1 and
WebServer_1 to group name ServerGroup_1:
WebServer_1 to group name ServerGroup_1:
Sentry:add OutletToGroup DataServer_1 ServerGroup_1<Enter>
Sentry:add OutletToGroup WebServer_1 ServerGroup_1<Enter>
Sentry:add OutletToGroup WebServer_1 ServerGroup_1<Enter>
The following command add all outlets to group name ServerGroup_1:
Sentry: add OutletToGroup<Enter>
Outletname: all<Enter>
Groupname: ServerGroup_1<Enter>
Outletname: all<Enter>
Groupname: ServerGroup_1<Enter>
Deleting an outlet from a group
The Delete OutletFromGroup command deletes an outlet from a group. To delete more than one outlet,
but not all outlets, you must use multiple Delete OutletToGroup commands.
but not all outlets, you must use multiple Delete OutletToGroup commands.
To delete an outlet from a group:
At the Sentry: prompt, type delete outletfromgroup, optionally followed by an outlet name and a
group name. Press Enter, or
group name. Press Enter, or
Type delete outletfromgroup, followed by all then the group name. Press Enter.
Environmental Monitor Administration
Creating a descriptive Environmental Monitor name
The Set Envmon Name command assigns a descriptive name to the integrated Environmental Monitor.
This descriptive name is displayed when the Evnmon command is issued.
This descriptive name is displayed when the Evnmon command is issued.
To create an Environmental Monitor name:
At the Sentry: prompt, type set envmon name, followed by the absolute Environmental Monitor name,
then the descriptive name of up to 24 alphanumeric and other typeable characters (ASCII 33 to 126
decimal – spaces are not allowed). Press Enter.
then the descriptive name of up to 24 alphanumeric and other typeable characters (ASCII 33 to 126
decimal – spaces are not allowed). Press Enter.
Example
The following command adds the descriptive name Florida_HQ_1to the Environmental Monitor:
Sentry: set envmon name .a Florida_HQ_1<Enter>
Creating a descriptive temperature/humidity sensor name
The Set Envmon THS Name command assigns a descriptive name to a temperature/humidity sensor.
This descriptive name is displayed when the Evnmon command is issued.
This descriptive name is displayed when the Evnmon command is issued.
To create an temperature/humidity sensor name:
At the Sentry: prompt, type set envmon ths name, followed by the absolute name of the
temperature/humidity sensor, then the descriptive name of up to 24 alphanumeric and other typeable
characters (ASCII 33 to 126 decimal – spaces are not allowed). Press Enter.
temperature/humidity sensor, then the descriptive name of up to 24 alphanumeric and other typeable
characters (ASCII 33 to 126 decimal – spaces are not allowed). Press Enter.
Example
The following command adds the descriptive name T/H2_Florida_HQ_1 to the second
temperature/humidity sensor:
temperature/humidity sensor:
Sentry: set envmon ths name .a2 T/H2_Florida_HQ_1<Enter>
Serial Port Administration
Creating a descriptive serial port name
The Set Port Name command assigns a descriptive name to a serial port. You may use this name in
commands that require a port name as an alternative to using the port’s absolute name.
commands that require a port name as an alternative to using the port’s absolute name.
To create an port name:
At the Sentry: prompt, type set port name, followed by the absolute outlet name and a descriptive
name of up to 24 alphanumeric and other typeable characters (ASCII 33 to 126 decimal - spaces are not
allowed). Port names are not case sensitive. Press Enter.
name of up to 24 alphanumeric and other typeable characters (ASCII 33 to 126 decimal - spaces are not
allowed). Port names are not case sensitive. Press Enter.
Example
The following command adds the descriptive name Rack1 to Console port:
Sentry: set port name console Rack1<Enter>
34
• Operations
Sentry PT22
Installation and Operations Manual