Sennheiser CONFERENCE SYSTEM SDC 8000 ユーザーズマニュアル
Operating the components of the SDC 8000 system
35
Switching between the A-channel and the B-channel
If you interpret into a second language, you have to switch from the A-
channel to the B-channel.
channel to the B-channel.
To switch to the B-channel:
왘
Press the “B-channel” key
.
The green LED
next to the “B-channel” key lights up.
To switch to the A-channel:
왘
Press the “A-channel” key
.
The green LED
next to the “A-channel” key lights up.
Muting the microphone of the interpreter console
To mute your microphone:
왘
Press the MUTE key
and keep it pressed.
Your microphone is muted.
To turn on your microphone again:
왘
Release the MUTE key
.
Your mirophone is turned on again.
Displaying text messages on the interpreter console’s display
If a PC with software control is connected to the central unit, you can
receive text messages from the central unit.
receive text messages from the central unit.
When you have received a text message, the MESSAGE LED on your
interpreter console lights up.
interpreter console lights up.
왘
Press the MESSAGE key
.
The text message is shown on the display.
왘
Press the MESSAGE key
again.
The display returns to the standard display.
Operating the central unit
Before a conference starts, you have to configure your entire conference
and interpretation system via the central unit’s operating menu (see
“Configuring the SDC 8000 system” on page 54); it is, however, possible to
make changes to individual settings during a conference.
and interpretation system via the central unit’s operating menu (see
“Configuring the SDC 8000 system” on page 54); it is, however, possible to
make changes to individual settings during a conference.
Adjusting the volume of the consoles’ built-in loudspeakers
Adjust the volume of the consoles’ built-in loudspeakers so that all
participants can clearly hear all audio information:
participants can clearly hear all audio information:
왘
Turn the jog wheel
on the central unit.
The volume of the consoles’ built-in loudspeaker is increased or
reduced. The bars on the start display indicate the set volume level.
reduced. The bars on the start display indicate the set volume level.
Note!
The conference participants cannot adjust the volume of their consoles’
built-in loudspeakers! However, each participant can individually
adjust the headphone volume on his or her console.
built-in loudspeakers! However, each participant can individually
adjust the headphone volume on his or her console.