SEH Computertechnik TPG60 ユーザーズマニュアル

ª

The settings are saved.

Table 5: Connection Service Parameter

If a connection to the Connection Service was refused, it is because
a value (client ID, authentication key, or IP address) was entered
incorrectly. Check and modify your settings and reestablish the
connection to the Connection Service manually. For this purpose,
click Reconnect.

A secure connection during the transfer of print jobs between
ThinPrint® (server or Connection Service) and the TPG60 is
guaranteed by means of an SSL encryption.

Connection Service

Enables/disables the .print Connection Service

Connection Server

IP address of the server on which the Connection 
Service is installed.

Port

Port number used by the TPG60 to communicate with 
the Connection Service (default = 4001)

Client ID

Client ID as stored in the database of the Connection 
Service. The client ID is needed by the Connection 
Service to forward print jobs to the TPG60. 

Authentication key

Authentication key as stored in the database of the 
Connection Service. 

Keep alive

Interval (in seconds) for refreshing the connection to 
the Connection Service. 
The value has to be lower or equal than the 
'KeepAliveTO' parameter of the .print Connection 
Service (server side).
(allowed entry: 30 - 180 | default = 60)

Connection retry

Interval (in seconds) for connection retries if the 
Connection Service is not reachable. 
(allowed entry: 5 -6000 | default = 120)