Philips Norelco AT920 ユーザーズマニュアル

 

w

  If the shaving unit becomes detached from the 

razor, you can easily reattach it.

 

w

  You may also clean the hair chamber without 

water by using the supplied brush.

Do not mix up the cutters and combs as the  

shaving performance may be adversely affected 

for several weeks before optimal shaving 

performance is restored.

 

  Turn razor OFF, remove the charging plug 

from the outlet and power cord from the 

razor.

C

 

  Press the Razor Head Release Button to 

open the Razor Head Assembly.

C

 

  Pull the shaving unit off the razor. 

 

 

 

C

 

  Turn the lock counterclockwise to unlock 

(1) and remove the retaining frame (2). 

 

20

C

  Remove and clean one set of cutters and 

combs at a time.

 

 

C

  Separate the cutter from the comb and 

clean it with the brush supplied.

Do not clean more than one cutter and comb 

at a time, since they are all matching sets. If you 

accidentally interchange the cutters and combs, it 

could take several weeks before optimal shaving 

performance is restored.

C

  Clean the inside and outside of the comb 

with the brush supplied.

For optimum performance, razor cutters and 

combs should be cleaned in a degreasing liquid 

(e.g. Philips Norelco Shaving Head Cleaning Spray, 

Model HQ110 or alcohol) and lubricated with 

one drop of mineral oil (in the center of the 

head).  This helps prevent wear of the shaving 

heads.

C

  Replace the set back into the Razor Head 

Assembly.

 

Make sure that the two pointy edges of the head 

 

fit exactly into the recesses.

 

21