New Transducers 250C ユーザーズマニュアル

��

��
��
��

��
��

��

��

NOTE: DO NOT mount the

transducer behind strakes,

struts, ﬁttings, water intake or

discharge ports, or anything that

creates air bubbles or causes the

water to become turbulent. It is

important that the transducer be

in clean (non-turbulent) water

for optimal performance.

Connecting a Transducer

to Multiple Sensors

Speed

Temp

Transducer

To Unit

ETTING

TARTED

NSTALLATION

Fishﬁnder 250/250C Owner’s Manual

Installing the Transducer

Proper transducer installation is key to getting the best performance

from your new unit. If the transducer lead is too short, extension

cables are available from your Garmin dealer. Coil and secure any

excess cable. DO NOT cut the transducer lead or any part of the

transducer cable, as this will void your warranty. The cable cannot

be spliced and connected to any existing (Garmin or non-Garmin)

transducer cables.
Following are some tips and basic installation instructions for

some popular transducers. Detailed installation instructions are

provided in the transducer kits. Some transducers may need to be

installed by a professional marine installer.

Transom Mount Installation

Transom Mount Transducer (depth/temp)