KVH Industries KVHTRACVISION L2 ユーザーズマニュアル

3. Open the terminal emulation software and

establish the following settings:

• 9600 baud

• no parity

• 8 data bits

• 1 start bit

• 1 stop bit

• no flow control

4. Apply power to the TracVision L2 system and

allow the system to complete full initialization.
Data should be scrolling on the PC display to
identify any system problems detected. If no data
is seen, recheck your connections and the terminal
software setup.

TracVision L2 system parser commands are detailed in