Korg D3200 ユーザーズマニュアル
138
11a. Album CD
Album CD Project lets you create an audio CD using Disc At
Once. The data will be written to the CD-R/RW as 16-bit/
44.1 kHz data in audio CD format.
Once. The data will be written to the CD-R/RW as 16-bit/
44.1 kHz data in audio CD format.
The disc is written using the Disc At Once method, including fi-
nalization. No further data can be written to the disc afterward.
nalization. No further data can be written to the disc afterward.
The CD-R/RW cannot be written if there is a track less than four
seconds long. Adjust your settings so that the PostGapTime and
the track time add up to at least four seconds.
seconds long. Adjust your settings so that the PostGapTime and
the track time add up to at least four seconds.
1. Track list
This displays a list of the songs that will be written to the
CD-R/RW disc as an album CD.
The list shows the track numbers, song name (mark
name), time, pre-gap, and post-gap of the tracks you reg-
istered for the album CD.
At the bottom of the window, the duration of the selected
(highlighted) track and the total time of the album are
displayed.
CD-R/RW disc as an album CD.
The list shows the track numbers, song name (mark
name), time, pre-gap, and post-gap of the tracks you reg-
istered for the album CD.
At the bottom of the window, the duration of the selected
(highlighted) track and the total time of the album are
displayed.
2. Preview player
Use these buttons to audition the songs shown in the list.
You can also use the top panel transport keys listed
below in square brackets [ ] to perform these operations..
You can also use the top panel transport keys listed
below in square brackets [ ] to perform these operations..
You cannot use these buttons if the list contains no songs.
If the CD-R/RW drive contains a blank disc, and there are
songs in the list display, pressing the top panel transport key
REC
songs in the list display, pressing the top panel transport key
REC
will open the Write to CD dialog box.
3. Add
This button adds a song to the list of songs that will be
written to the CD-R/RW disc. Select the track number
and click the button to display the Add TR dialog box.
Select the desired song from the song list.
The song number, song name, mark icon, sampling fre-
quency/bit-depth, protect icon, and date of each song
will be displayed.
The song data that will be written to the CD-R/RW will
be the song data as of when you clicked Add button. If
you edit that song after clicking the Add button, you will
need to add that song to this list once again if you want to
write the updated data.
written to the CD-R/RW disc. Select the track number
and click the button to display the Add TR dialog box.
Select the desired song from the song list.
The song number, song name, mark icon, sampling fre-
quency/bit-depth, protect icon, and date of each song
will be displayed.
The song data that will be written to the CD-R/RW will
be the song data as of when you clicked Add button. If
you edit that song after clicking the Add button, you will
need to add that song to this list once again if you want to
write the updated data.
Cancel button
Returns to the Album CD Project page without add-
ing the selected song to the list.
ing the selected song to the list.
OK button
Adds the selected song to the list.
When you click this button, the display will ask “Are
you sure?”
When you click this button, the display will ask “Are
you sure?”
Press Yes to confirm your settings (or No
to discard them) and return to the Album CD Project
page.
page.
You cannot add a song whose master track contains no data.
If you select a song that is other than 44.1 kHz/16-bit,
click the Dither button to turn it on (highlighted), and the
sampling frequency and bit-depth will be converted. The
converted data will consume additional disc capacity. If
the song has a different sampling frequency, conversion
will be performed; this will take a certain amount of time
to complete.
click the Dither button to turn it on (highlighted), and the
sampling frequency and bit-depth will be converted. The
converted data will consume additional disc capacity. If
the song has a different sampling frequency, conversion
will be performed; this will take a certain amount of time
to complete.
Only the data to be burned to the CD-R/RW disc will be
converted; the song data itself will remain in its original
sampling frequency and bit-depth.
converted; the song data itself will remain in its original
sampling frequency and bit-depth.
4. Delete
Deletes a song from the track list. In the list, choose the
song that you want to delete and click this button to dis-
play the Delete dialog box. Click the Yes button (or press
the panel YES key) to delete the song from the list. Subse-
quent song tracks will be moved back one track.
If you want to delete all songs from the list, click the
Select All
song that you want to delete and click this button to dis-
play the Delete dialog box. Click the Yes button (or press
the panel YES key) to delete the song from the list. Subse-
quent song tracks will be moved back one track.
If you want to delete all songs from the list, click the
Select All
button and then click the Yes button (or press
the panel YES key).
5. Drive
Selects the drive that contains the songs you want to
write to the CD-R/RW disc. When you click this button,
the Select Drive dialog box will appear.
The dialog box will display the total capacity of the inter-
nal drive, and a list of the song drives.
For each song drive, the display will show the drive
name, partition size, partition name, amount used, and
remaining space.
write to the CD-R/RW disc. When you click this button,
the Select Drive dialog box will appear.
The dialog box will display the total capacity of the inter-
nal drive, and a list of the song drives.
For each song drive, the display will show the drive
name, partition size, partition name, amount used, and
remaining space.
The songs to be written to one CD-R/RW disc must all be on
one song drive.
one song drive.
6. Gap
This lets you specify a duration of silence that will be
inserted before and after a song. When you click the but-
ton, the Edit Gap dialog box will appear.
In this dialog box, Frm refers to a CDDA Frame, where 75
Frm = one second.
inserted before and after a song. When you click the but-
ton, the Edit Gap dialog box will appear.
In this dialog box, Frm refers to a CDDA Frame, where 75
Frm = one second.
:
[PLAY] Plays the song.
:
[STOP] Stops the song.
:
[REW] Moves to the preceding song each time you
click this button. If you press this during playback,
you will move to the beginning of the currently-
playing song.
click this button. If you press this during playback,
you will move to the beginning of the currently-
playing song.
:
[FF] Moves to the next song each time you click this
button. If you press this during playback, you will
move to the beginning of the next song.
button. If you press this during playback, you will
move to the beginning of the next song.
1
2
3
4
5
6
7
6a
6b