Korg D3200 ユーザーズマニュアル

You can use the sixteen control knobs of the Knob Matrix in the following tab pag-
es. In pages where there are seventeen or more knob icons, you can hold down 
the JUMP key and use the cursor keys to switch between groups of sixteen knobs 
for editing.

Figure 1 shows the EFFECT, “MstrEFF1” tab page.
To select this tab page, press the top panel EFFECT key, and then click the 
“MstrEFF1”

 tab in the LCD screen.

In this screen, the knob icons are linked with the Knob Matrix below; you can 
move a knob to edit the value directly. Knobs for which no knob icon is shown 
have no effect.

Figure 2 is the MIXER, FADER/PAN/AUTOMATION “Fader Pan” tab page. To 
select this tab page, press the direct key PAN. Alternatively, you can press the 
MIXER

 key and then click the screen.

In this screen, moving the fader or Knob Matrix (corresponding to pan for each 
channel) of the desired channel will automatically select that channel, and change 
its fader or pan value.

Figure 3 is the CH VIEW, “Ch View” tab page.

To select this tab page, press the direct key CH VIEW.
You can also click the screen to select this tab page after pressing the CH VIEW 
key.
In this screen, the fader, EQ, and Send are controlled directly by the fader of that 
channel and by the Knob Matrix.

CH VIEW page

Ch View tab page

EFFECT page

InsertEFF, MstrEFF1, MstrEFF2, and FinalEFF tab pages

SEND page

EFFSend1, EFFSend2, Aux1Send, and Aux2Send tab 
pages

EQ page

EQ/ATT and MasterEQ tab pages

FADER page

Fader Pan and Mixer View tab pages

SOLO page

CueLevel tab page

CH INPUT page

SubMix1-4, SubMix5-8, and SubMix9-12 tab pages

DRUMKIT screen

METER screen (when FaderView is selected)

Figure 1

Figure 3

Figure 2