Korg D3200 ユーザーズマニュアル

Each of the inputs needs to be assigned to a channel. First, let’s assign the guitar input to channel 1.

Press the MIXER key, and then click the page jump menu CH INPUT/SubMixer button to 
access the “Ch Assign” tab page.

In the tab page, click the CH1 SOURCE channel icon. The icon will be enclosed by a frame.

Click the 

 buttons to assign “1” (INPUT 1) as the input source for channel 1 (CH1 

SOURCE).
You can also use the value dial or the +/– keys to change this setting.

Adjust the CH 1 input level to verify that the sound of the 
guitar has been assigned.

Lower the CH1 fader to “–

∞”, and raise the MASTER 

fader to the “0” position. 

The pad lowers the input signal by an additional 26dB. 
For a mic or guitar, leave the PAD key unpressed when 
making your settings. For a line-level output, such as 
from a keyboard, press the PAD key to the in position 
(on) when making your settings.

Turn on the REC/PLAY key, and press the CH1 chan-
nel key to select Record (key lit red).

As you play your guitar, the INPUT 1 peak indicator (the LED at the upper left of TRIM) will 
light. Adjust the TRIM knob so that your loudest playing does not cause the LED to light red.

Gradually raise the CH1 fader while playing your guitar, and you will hear sound from your 
monitor speakers.
If you are using headphones, adjust both the PHONES LEVEL knob and the MONITOR 
LEVEL

 knob.

Using these same methods, we can assign the mic and keyboard 
inputs to their own channels.

Click the CH2 SOURCE channel icon, and assign “2” (INPUT 
2) as the input source for channel 2 (CH2 SOURCE).
Using this setting, the sound of the mic connected to INPUT 
2 will be sent to CH2. Set and check the mic level as described 
in steps (4)–(8).

Click the CH3 SOURCE channel icon, and assign “3” (INPUT 3) as the input source for channel 
3 (CH3 SOURCE). Repeat this step and assign “4” (INPUT 4) as the input source for channel 4 
(CH4 SOURCE).