Korg D3200 ユーザーズマニュアル

 

• During CD reading and writing operations, keep the unit 

in a horizontal position.

• Do not use the unit in extremely cold or hot locations.
• Do not use the unit in extremely humid locations.
• Do not use the unit in dusty or smoky locations.
• Do not subject the unit to vibration or strong physical 

shock. In particular, this unit is vulnerable to shock during 
CD reading and writing operations.

• Normally, you will be able to open the CD tray by press-

ing the eject button. However if this fails, you can forcibly 
eject the tray by inserting a thin object (such as a straight-
ened paper clip) into the emergency eject hole.

• Do not store the unit in hot or humid locations.
• Never touch the focusing lens.
• Do not use commercially available lens cleaners.
• Do not transport the unit with a disc left in the tray.
• Do not leave the unit with the disc tray open.

 

Please observe the following points when handling discs. 
Failure to observe these points may cause problems such as 
data not being written correctly, loss of recorded data, or 
drive malfunction.
• Do not leave discs in direct sunlight, or in locations of 

high temperature or high humidity.

• Do not touch the surface of a disc. Hold a disc by its 

edges.

• Remove dust or dirt from the surface of a disc. To remove 

dust, use an air duster or cleaner.

• Do not affix labels to a disc, or write on a disc in locations 

other than specified.

• Do not use chemicals or detergent to wipe a disc.
• Do not bend or drop a disc.

 

Korg Corporation will accept no responsibility for any dam-
ages (direct or indirect, whether sustained by the customer or 
by a third party) resulting from loss of or damage to data 
written on a CD-R or CD-RW disc.

 

In this manual, “faders,” “knobs,” and “keys” refer to 
controls on the panel. The names shown on the panel are 
printed in boldface in the manual.
Examples: MASTER fader, TRIM knob, REC/PLAY key

 

“Buttons” and “dialog boxes” are displayed in the LCD 
screen. The names shown in the screen are printed in 

 

 in the manual.

Items printed in “

 

” are parameters or tab page 

names shown in the LCD screen.
Examples: 

 

 button, 

 

 dialog box, 

 

 tab 

page

 

 is also used to indicate the names of non-

selectable parameters shown in the LCD screen, or to 
indicate content in the text that we wish to emphasize.

 

Steps in a procedure are indicated as (1) (2) (3) ...

 

→

 

■■

 

This indicates a reference page within this manual.

 

These symbols respectively indicate points of caution, 
notes of advice, or examples.

 

This refers to a page shown in the LCD screen. To access 
this page, press the top panel … key, and then click the 
“XX” tab in the LCD screen (

 

 

You can also use the panel 

 

√

 

TAB PAGE/TAB PAGE

 

®

 

 keys 

to move between tab pages.

 

The top panel MIXER key and CD key display a page 
jump menu in the LCD screen before the tab pages 
appear, so click the page button (

 

 

 

 

p.13). Pressing the 

 

 key or 

 

 

key will take you back to the page jump menu screen.

 

The parameter values shown in the LCD screens printed 
in this manual are explanatory examples, and may not 
necessarily match the displays that appear on your 
D3200.