Korg D3200 ユーザーズマニュアル

To create an audio CD, you need to create a stereo master track.
There are eight virtual master tracks (per song). This way, you can create various 
mixes of your song, and compare them before choosing your favorite.

Press the TRACK key, select the “MasterTrk” tab page, and click the V-Level 
buttons to select a virtual master track (A–H).

Press the MASTER key located above the MASTER fader to select Record 
mode (key lit red). The REC/PLAY key will automatically be turned on, and 
the channel keys of each track will automatically be set to Play mode (key lit 
green).

• Set the MASTER fader to “0.”
• Press the METER key.
• Press the PLAY key to play back the song.
• While watching the master bus level meter, adjust the MASTER fader so 

that clipping does not occur.

Press the REC key to enter record-ready condition (LED blinking), and then 
press the PLAY key to begin recording (LED lit).
When you finish recording, press the STOP key.

Press the MASTER key located above the master track to set it to play (key lit 
green).
The channel keys of tracks 1–16 will automatically change to muted (key 
unlit).
Return to the beginning of the song. (

Press the PLAY key and enjoy your song.