Korg D3200 ユーザーズマニュアル

Automation is a function that automatically modifies mixer 
settings as the song location changes during playback.
There are two types of automation; scene automation and 
event automation.

When automation is on, you can use the SCENE “Mixer 
View”

 tab page to view fade-in and fade-out operations and 

scene changes in which fader values change.

This type of automation automatically switches mixer set-
tings when the song location during playback or recording 
arrives at the registered location for that scene.

When you register a scene, the location is also registered 
along with the other settings. When the current location of 
the song matches the registered location of the scene, the 
Scene Automation function will automatically select this 
scene, causing the mixer settings to change to the settings of 
the scene.

You can also re-register a scene at a different location, or edit 
the mixer settings of the scene and overwrite it onto the same 
scene memory.

Scenes can be set to change automatically, when playback 
reaches the location where the scene was stored.

Automation “ON.”
The automation indicator will light.

Move to the location where you want the playback to 
start, and press the PLAY key.
When playback reaches the location at which the scene 
was stored, that scene will be recalled.

You can recall a stored scene and store it again at a different 
location.

want to store again at a different location.
For the procedure, refer to “4-2. Recalling a scene” 
(

For details, refer to “4-1. Storing a scene.”

You can edit the location of a stored scene to change when it 
will become active during playback.

panel YES key) to finalize the change.
If you click the No button (or press the panel NO key), 
you will return to the “EditScene” tab page without 
making any change.

This type of automation records mixer operation events such 
as fader movements or pan motion during playback, and re-
produces these operations at the corresponding time during 
playback or recording.
You can also selectively re-record the recorded events, or 
copy them to another location or a different channel.
You can keep recording events until the Events Remaining 
indication reaches 0%.
The following operations can be recorded as events.

• Fader operations of each channel
• MASTER fader operations
• Channel On operations of each channel
• Pan operations of each channel
• AUX send operations of each channel
• Effect send operations of each channel
• Expression pedal operations

You can use the Undo function to restore recorded or edited 
automation events to their state prior to recording or editing.

There are two ways to record event automation.
You can overwrite all events from the point where you start 
song playback/recording until the point where you stop 
(Over Write). Alternatively, you can record only the opera-
tions that occur between two specified locations, or only for 
the region in which you actually operated the faders (Punch 
Write

). (

→p.104)

As an example, here’s how to use “Over Write” to record 
events while the song plays back.

ing automation, and store the mixer settings as a scene.
Automation recording will start from the location of the 
scene you store here, and this scene will be the mixer set-
tings at the beginning of the recording.
• If you want to use an existing scene, recall that scene, 

move to the location at which you want to begin 
recording automation, and store the scene again.

the channels for which you want to record mixer opera-
tions.
If you want to record events for a channel, click its but-
ton to make it indicate “

”.

radio buttons to select the type of event you want to 
record.
You can record only one type of event at a time.