Microtek Take-it MV300 ユーザーズマニュアル

Use the Print function to print still images stored on your
DV camera. You can print either an individual image or
all your images. To access the Print function:

1. Turn on the DV camera and make sure it is in

Playback mode. See Modes on page 16.

2. Press the MENU button on the rear of the DV

camera to display the setup menu screen.

3. Use the / button on the rear

of the DV camera to select the
Print icon.

4. Press the

button to display the

Print options. Use the / button
to select the option you require.

5. Press the OK button to confirm

your choice.

If you chose to print just a single
image, the last image you
selected in Playback mode will
be printed.

If you chose to print all images,
all your still images will be
printed. Choosing Cancel will
return you to Playback mode
without printing any images.

6. Press the MENU button to exit the menu.

Setup Menu

Use the Setup menu to set various parameters for your
DV camera. The Setup menu can be accessed from
any mode and is always the same.

Brightness

Use the Brightness option to set the LCD screen
brightness level. There are five levels of brightness
available.

1. Turn on the DV camera and press the MENU button

to display the main menu screen.

2. Press the

button to select the

Setup menu option at the top.

3. Use the / button to select the

Brightness option.

4. Press the

button to display the

available options.

5. Use the / button to select an

option.

6. Press the

button to confirm

your choice.

7. Press the MENU button to exit

the menu.