Memorex MCD4300BT ユーザーズマニュアル
27
ADVANCED FEATURES (CONTINUED)
ASSIGNING/CHANGING A HANDSET’S INTERNAL/INTERCOM
(EXTENSION) NUMBER
(EXTENSION) NUMBER
The handset that comes with the unit is assigned number 1 at the factory. To
assign or change the number of the additional handsets (if purchased), in order to
take advantage of the additional features, simply follow the instructions below:
assign or change the number of the additional handsets (if purchased), in order to
take advantage of the additional features, simply follow the instructions below:
Press the MENU button; the Menu will
appear in the display.
appear in the display.
1.MEMORY
2.SET UP
3.RINGER
4.VOLUME
1
Using the CID JOG control ❶, scroll
down to select “2. SET UP” and press
the CID JOG control ❶, or simply
press the “2” button ❷; the SET UP
Menu will appear in the display.
down to select “2. SET UP” and press
the CID JOG control ❶, or simply
press the “2” button ❷; the SET UP
Menu will appear in the display.
1
2
2
Using the CID JOG control ❶, scroll
down to select “2. EXTENSION” and
press the CID JOG control ❶, or
simply press the “2” button ❷.
down to select “2. EXTENSION” and
press the CID JOG control ❶, or
simply press the “2” button ❷.
1
2
3
TO EDIT AN EXTENSION: Using key
buttons (1-7), edit the extension number.
The extension number will appear at the
top left of the handset’s display.
buttons (1-7), edit the extension number.
The extension number will appear at the
top left of the handset’s display.
AM
1
4
SELECT BUTTON: The SEL button can be pressed to select functions instead of
pressing the CID JOG control, use the one you feel more comfortable with.
pressing the CID JOG control, use the one you feel more comfortable with.
CLEAR BUTTON: Press and hold the CLEAR button to go back to the Standby
mode from any other mode.
mode from any other mode.
NOTE:
• The main base phone is preset at the factory to number 1. You need to program
• The main base phone is preset at the factory to number 1. You need to program
any additional phones to a number other than one. If the base phone is
accidentally changed from the 1 setting, simply follow the instructions above to
set it back to 1.
accidentally changed from the 1 setting, simply follow the instructions above to
set it back to 1.
MCD4300BT.2002.O/M.QXD 4/19/02 9:57 AM Page 27