Macsense Connectivity HomePod ユーザーズマニュアル

 

26 

To set the network mode, click on the appropriate button. 

In the ad-hoc mode, the Channel defines the frequency at which 
HomePod will communicate with the other ad-hoc device, in this case 
another computer. Both the HomePod and the other computer must 
operate in the same network name and channel. The channel field is not 
used if the network mode is set at infrastructure. 

To set the channel, pull down the list and select a channel from 1 
through 14. 

If the access point has WEP Encryption turned on, then HomePods 
needs to be set with the same encryption parameters, and also have the 
matching key. 

To turn on WEP encryption on the HomePod, select the Enable button 
and click either the 64-bit or 128-bit option. Enter the WEP key in hex in 
its respective field, Key 1 through 4; normally only Key 1 is used. If the 
WEP Encryption is 64 bit, the hex key requires 10 characters. If the 
WEP Encryption is 128 bit, the Hex key requires 26 characters. A hex 
key is a continuous stream of hex characters (0-9, A-F) without hyphen 
or space between them. 

After saving the changes, you must restao(h 14.pl Tc0.802 Tw[ -9.7(o)1.6(r)-he net)11.7(w)14.4(i)]TJT*0.0002 Tc0.002 Tw[(mat )nactftiv.]TJ/TT6 1 Tf10-1.2467 TD-0.0004 8c0.0033 w[(ma8.3 Miscell)-4.3(w)0.802owww