GoVideo DP 5050 ユーザーズマニュアル

9

1  Connect the battery pack to the back of the 

player as shown.

2  Plug the supplied AC adapter into a standard 

power outlet, and then connect it to the DC In 

jack on the right side of the player.

3  Turn off the player. The battery pack will 

NOT charge while the portable DVD player is 

powered on.

4  The battery charge indicator will turn red while 

the battery is charging.

5  The battery charge indicator will turn green 

when the battery pack is fully charged.

•  Press the Battery Release button on top of the 

battery pack to remove it.

•  Use the specified battery pack only.

•  May explode if battery pack is 

incorrectly replaced or disposed of 

in fire. Replace only with the same 

or equivalent type.

•  Do not short circuit.

•  Do not place the battery pack in direct sunlight 

or in excessively hot places (over 140°F (60°C) 

such as the dashboard of cars.

•  Use only with the specified power adapter 

(12VDC, 1.25A).

1  DC In Jack

2  Battery Release Button

3  Battery Charge Indicator

4  Battery Connectors

Before using the battery pack, make sure it is fully 

charged. You can charge the battery pack directly 

or while it is attached to the portable DVD player.

1  Plug the supplied AC adapter into a standard 

power outlet, and then connect it to the DC IN 

jack on the left side of the battery pack.

• You can also use the supplied cigarette 

lighter adapter in place of the AC adapter to 

charge the battery.

2  The battery charge indicator will turn red while 

the battery is charging.

3  The battery charge indicator will turn green 

when the battery pack is fully charged.

• Allow ~3 hours to fully charge the battery.

• A fully charged battery permits ~3 hours of 

playback time.