Fujitsu Network Hardware V01 ユーザーズマニュアル
![Fujitsu](https://files.manualsbrain.com/attachments/6c4642b33d2edbd09f94719c20a133aa0e862902/common/fit/150/50/80a45702a21fefb1823bce6851e87db450dccf7792cb572ebc8a90330a68/brand_logo.png)
Chapter 3 Web Operation
IP-900 Series
45
Table 3-11 Alarm List
Code
Name
Description
Details (The part after the * mark is not displayed.)
I001
SDI input down
HD/SD-SDI input signal not detected
−
I002
HDMI input down
HDMI input signal not detected
−
I003
Analog input down
Analog video input signal not detected
−
I011
Video synchronization error
Video input synchronization failure
−
I021
Input data error (*7)
Count-up occurred in the performance
statistics error counter
statistics error counter
#xxxxxxxxxxxxxxxx
* 64-bit hexadecimal number. For the meaning of
each bit, see Table 3-12, "Bit Formats for Input Data
Errors."
* 64-bit hexadecimal number. For the meaning of
each bit, see Table 3-12, "Bit Formats for Input Data
Errors."
E001
Power error (*1)
Power failure occurred
#1 * Power failure on CNT board
#2 * Power failure on COD board
#2 * Power failure on COD board
E003
Temperature error occurrence (*5)
Extreme temperature (shutdown
processing started)
processing started)
#1 TEMP1=t1 TEMP2=t2 FAN=xxxRPS
#2 TEMP1=t1 TEMP2=t2 FAN=xxxRPS
* Details are as follows:
#1/#2: Number of the temperature sensor that has
detected a temperature error
t1: Temperature indicated by temperature sensor 1
t2: Temperature indicated by temperature sensor 2
xxx: FAN rotational speed
#2 TEMP1=t1 TEMP2=t2 FAN=xxxRPS
* Details are as follows:
#1/#2: Number of the temperature sensor that has
detected a temperature error
t1: Temperature indicated by temperature sensor 1
t2: Temperature indicated by temperature sensor 2
xxx: FAN rotational speed
E004
Flash ROM error (*1)
Internal flash ROM access error occurred
/dev/mtd0 to 15
* Displays the occurrence range of access error.
* Displays the occurrence range of access error.
E00A
Flash ROM check sum error (*1)
Operation data error detected in internal
Flash ROM
Flash ROM
software
bundle software
configuration
configuration#1∼#10
option
* Displays the occurrence range of check sum errors.
bundle software
configuration
configuration#1∼#10
option
* Displays the occurrence range of check sum errors.
E010
FAN error (*2)
FAN error (low speed) or stopped
xxxRPS * xxx: FAN rotational speed