Fujitsu Network Hardware V01 ユーザーズマニュアル
Chapter 3 Web Operation
IP-900 Series
86
After the completion of the settings, click the
button. The message below appears. Click OK
to apply the settings. * Reboot is not required.
Table 3-23 Setting Items for Encoder Address Report
Item
Description
Value
Main
encoder
report
settings
Encoder name
Specify an arbitrary name
used to identify the encoder.
Up to 16 characters
Local port
Specify the own device port
number used to send an
encoder address message.
0 or 1024 to 64000 (Default: 0)
* If 0 is specified, one of the port numbers
from 64100 to 65000 is automatically selected.
Main
encoder
destination
settings
Destinat
ion 1 to
10
IP version
Specify the IP version of the
IP address of the destination
device to which the encoder
report is to be sent.
- IPv4 (default)
- IPv6
IP address
Specify the IP address of the
destination device to which
the encoder report is to be
sent.
Other than 0.0.0.0
(Default: Blank)
* A blank field means that no value is
specified.
* A multicast address cannot be set.
(Default: Blank)
* A blank field means that no value is
specified.
* A multicast address cannot be set.
Destination
port
Specify the port number of
the destination device to
which the encoder report is
to be sent.
- Blank or 1024 to 64000
(Default: Blank)
* A blank field means that no value is
(Default: Blank)
* A blank field means that no value is
specified.
Sub encoder
report
settings
Encoder name
Specify an arbitrary name
used to identify the encoder.
Up to 16 characters
Local port
Specify the own device port
number used to send an
encoder address message.
0 or 1024 to 64000 (Default: 0)
* If 0 is specified, one of the port numbers
from 64100 to 65000 is automatically selected.
Sub encoder
destination
settings
Destinat
ion 1 to
10
IP version
- IPv4 (Default)
- IPv6
IP
address
Specify the IP address of the
destination device to which
the encoder report is to be
sent.
Other than 0.0.0.0
(Default: Blank)
* A blank field means that no value is
specified.
* A multicast address cannot be set.
(Default: Blank)
* A blank field means that no value is
specified.
* A multicast address cannot be set.
Destination
port
Specify the port number of
the destination device to
which the encoder report is
to be sent.
- Blank or 1024 to 64000
(Default: Blank)
* A blank field means that no value is
(Default: Blank)
* A blank field means that no value is
specified.