Falcon 4400 ユーザーズマニュアル

ページ / 68
Powering the Falcon
Quick Reference Guide
 
 
9
Powering the Falcon
Battery Pack
The battery pack in the Falcon is a 3.7 V, Lith-
ium Ion battery pack. You will be alerted with a 
message dialog box when the battery pack 
reaches a low state. 
After charging the first time, a complete charge 
takes about four (4) hours depending on the bat-
tery pack’s state and the recharging method. A 
sample battery pack label is shown at the right.
Stylus
Use the stylus for navigation and to select items on the touch screen, and to 
select characters on the on-screen keyboard. Place the stylus in the holder 
after use so you don’t lose or misplace it. An optional Stylus Tether is avail-
able for both models.
Feature
Function/Description
More 
Information
3.7V
Li-ion
CAUTION:  Battery can explode, leak or catch 
fire if exposed to high temperature, water or fire. 
Do not short circuit, open or disassemble battery. 
Recycle or dispose of properly.
2000mAh
5-1764
Product of USA
U          S
CAUTION
You must charge the battery pack and backup battery in a dock or with a power
cable prior to your first use of the Falcon. The initial charge time is approximately
24 hours.
If you remove the battery pack or it fails, there is a 30 minute window in which to
insert a charged battery pack before the backup battery fails. If your backup bat-
tery fails, the contents of the RAM memory will be lost. If your backup battery is
less than fully charged, there is a proportionally smaller window of time available
to replace the main battery. Usage time will also be reduced.
Always charge the battery pack within the temperature range of 32°–113°F (0°–
45°C).
Use only the authorized power supplies, battery packs, chargers, and docks sup-
plied by your PSC reseller. The use of any other power supplies can damage the
Falcon and void your warranty. Refer to the PRG 
for the correct power supplies
and Accessories.