ATD Tools Blower ATD-36750 ユーザーズマニュアル
NOTES:
8
Operating Instructions
1. TURN ON: Press the ON/OFF button once to turn on and again
to turn off. NOTE: Hold button down for approximately 1 second
to turn unit off.
to turn unit off.
2. WARM UP: The detector automatically starts heating the
sensor. During the heating cycle, the digital leak size indicator
will flash 0 and the detector will sound a slow “beep”. Warm up
is usually less than 20 seconds.
will flash 0 and the detector will sound a slow “beep”. Warm up
is usually less than 20 seconds.
3. READY: The detector is ready to begin searching for leaks
when the flashing 8 stops and the green sensitivity LED turns on.
The audio “beep” increases in frequency and probe LED begins
to blink steadily.
The audio “beep” increases in frequency and probe LED begins
to blink steadily.
2
Digital Leak Size
Indicator
Low Battery
Indicator
Sensitivity Level
Indicators
Audio Mute &
Sensitivity Level
Power
On/Off
ATD-36750 Control Panel
2
UV Light Power On/Off