Arizona MAX-5000XL ユーザーズマニュアル

AZI Customer Service 800-528-7411 or 602-470-1414  

Page 32 of 92 

  DISPLAY RESULT AS:  Selects 

the final display value of 
moisture, solids or dry weight, 
ash or LOI. 
  % Moisture - Test results are 

displayed as a percentage of 
weight loss. 

  % Solids - Test results are 

displayed as a percentage of 
weight remaining.  The 
instrument is optimized to run in %Solids for samples > 99.5% volatiles. 

  % Dry Weight - Test results are displayed as a dry weight basis. 

% Dry Weight = ((W

INITIAL

 

– W

FINAL

) / W

FINAL

) * 100 

Note that the dry weight value ratio can exceed 100%, and often does in 
applications such as soil and forest fuels analysis. 

  % Ash 

– Test results are displayed as a percentage of weight remaining. 

  % LOI 

– Test results are displayed as a percentage of weight loss. 

  PASS-FAIL 

– Toggles ON or OFF   

  Low Limit 

– sets the lowest 

acceptable limit for the test.  
A final test value below this 
figure will cause a FAIL 
indication to appear on the 
display and, if selected in 
setup, on printed reports. 

  High Limit 

– sets the highest 

acceptable limit for the 
moisture test.  A final test 
value above this figure will 
cause the FAIL indication to appear on the display and, if selected in setup, 
on printed reports. 

 

  Low Moisture CF - For 

extremely low moisture products, 
a calibration factor can be used 
to align MAX 5000XL results to 
the reference standard.  The 
percentage difference between 
the stabilized MAX 5000XL 
mean values and the reference 
standard is entered as the LOW 
MOISTURE CF.  This feature is 
not typically used.