Addonics Technologies Mobile DVDR/RW ユーザーズマニュアル

 
 

 
(Note for Win98SE only: After plugging in the cable some system might 
prompt you for Win98SE CD, in case you don’t have The Win98SE CD and the 
wizard prompt you for  

a.  NTMAP.SYS please type C:\WINDOWS\SYSTEM32\DRIVERS 
b.  NTMAPHLP.PDR please type C:\WINDOWS\SYSTEM\IOSUBSYS 

 
 
IF the system did not prompt you for anything just follow the steps below) 
 
 
 
1.  Make sure the Firewire cable is securely attach from the back of the drive. 
2.  Make sure that power is attached and turned on.   
3.  Power on the system, on the Window Desktop, double click on the 
       MY COMPUTER icon.                   

4.  Plug the Addonics 6 Pin FIREWIRE-IDE cable into your computer’s 

FIREWIRE port cable shown on Diagram 1. 

5.  Wait for a few seconds, your computer may blink for a moment. 
6.  Double Click on the “My Computer” icon if not open yet. Your Mobile 

DVD±R/RW will appear as a CD drive icon. You are now ready to use the   

       DVD±R/RW Drive.    
 
 

 for computer that has a 4-pin firewire port, you will need to get a 6 to 4 

pin Firewire adapter. 
 
 
 
 
 
 
 
 
 
 
 
 
 

Addonics Technologies – Mobile DVD±R/RW Users Guide v 1.0 

6