Adder Technology AdderView CATxIP 1000 ユーザーズマニュアル
5V
2.0A
12
1
16
1
OPTION
S
COMPUT
Power in connection
The.AdderView.CATxIP.1000.unit.is.supplied.
with.a.standard.5V.power.adapter..There.is.no.
on/off.switch.on.the.unit,.so.operation.begins.
as.soon.as.a.power.adapter.is.connected.
with.a.standard.5V.power.adapter..There.is.no.
on/off.switch.on.the.unit,.so.operation.begins.
as.soon.as.a.power.adapter.is.connected.
2. Connect.the.IEC.connector.of.the.supplied.country-specific.power.lead.to.
the.socket.of.the.power.adapter.
3. Connect.the.power.lead.to.a.nearby.main.supply.socket.
Note: Both the AdderView CATxIP 1000 and its power supply generate heat
when in operation and will become warm to the touch. Do not enclose them
or place them locations where air cannot circulate to cool the equipment. Do
not operate the equipment in ambient temperatures exceeding 40 degrees
Centigrade. Do not place the products in contact with equipment whose surface
temperature exceeds 40 degrees Centigrade.
when in operation and will become warm to the touch. Do not enclose them
or place them locations where air cannot circulate to cool the equipment. Do
not operate the equipment in ambient temperatures exceeding 40 degrees
Centigrade. Do not place the products in contact with equipment whose surface
temperature exceeds 40 degrees Centigrade.
AdderView CATxIP
000 rear panel
output lead from
power adapter
POWER
IN
To connect the power supply
1. Attach.the.output.lead.from.the.power.adapter.to.the.
5V
.socket.on.the.rear.
panel.of.the.AdderView.CATxIP.1000.