DELL EMC AX4-5 ユーザーズマニュアル

Preparing Your Systems for Clustering

41

•

Create a zone for each HBA port and its target storage devices.

•

Each AX4-5 storage processor port can be connected to a maximum of 64 
HBA ports in a SAN-attached environment.

•

Each host can be connected to a maximum of four storage systems.

•

The integrated bridge/SNC or fibre-channel interface on a tape library 
can be added to any zone.

Installing and Configuring the Shared Storage 
System

 

NOTE: 

You must configure the network settings and create a user account to 

manage the AX4-5 storage system from the network.

To install and configure the Dell/EMC storage system in your cluster:

1 Install and use Navisphere

®

 Storage System Initialization Utility from a 

node or management station to initialize your AX4-5 storage system. 

2 Install the expansion pack using Navisphere Express (optional).
3 Install the Navisphere Server Utility on each cluster node.
4 Register the cluster node with the storage system.
5 Assign the virtual disks to the cluster nodes.

Installing Navisphere Storage System Initialization Utility

The Navisphere Storage System Initialization Utility provides a user interface 
to initialize your AX4-5 storage system. Using the utility, you can configure 
the IP address, subnet mask, default gateway address for the storage system’s 
SPs, and assign user names and password for storage system access. 

1 To install the software from the support media that is shipped with the 

storage system:

a

Insert the installation media in the CD/DVD drive. 

b

In the Choose Language Setup screen, select the appropriate 
language and click OK. 

c

On Server screen, click Install Products.

d

In the Install Products menu, click Navisphere Storage System 
Initialization Utility.