Behringer Europower PMP518M ユーザーズマニュアル

behringer.com

EUROPOWER PMP518M User Manual

For connection of balanced and unbalanced plugs,
ring and sleeve have to be bridged at the stereo plug.

Fig. 4.2: 1/4" TRS connector

For unbalanced use, pin 1 and pin 3 have to be bridged

1 = ground/shield
2 = hot (+ve)
3 = cold (-ve)

1

2

3

1

2

3

Fig. 4.3: XLR connectors

Fig. 4.4: RCA cable

Your EUROPOWER is equipped with high-quality Neutrik Speakon-compatible 

loudspeaker connectors, which ensure safe and trouble-free operation. 

The Speakon connector was especially developed for high-power loudspeakers. 

Once it is plugged in, it safely locks into position and cannot be accidentally 

disengaged. It prevents the occurrence of electrical shock and ensures the 

correct polarity. Each of the connectors carries only the assigned single signal 

(see tab. 4.1/fig. 4.5 and the information on the rear panel of the power mixer).

1-

2-

2+

1+

1-

2-

2+

1+

front view

rear view

Fig. 4.5: Loudspeaker connector

Please be sure to only use commercial Speakon cables (type NL4FC) for 

connecting your loudspeakers to the mixer. Please check the pin connections 

of your loudspeakers and cables depending on the EUROPOWER speaker output 

you choose.

1+

1-

2+

2-

POS

NEG

POS

NEG

Tab. 4.1: Pin connections of the professional loudspeaker connector