Marantz SR5300 ユーザーズマニュアル

14

Release the vinyl tie and take out the connection line.

Bend in the reverse direction.

Inserting into the hole to attach the loop antenna to the antenna
stand.

With the antenna on top any stable surface.

Ω ANTENNA ADAPTER

Ω ribbon wire

Loosen the screws and wrap the wire around these screws.
Then tighten the screws with a screwdriver.

Connecting the supplied FM feeder antenna
The supplied FM feeder antenna is for indoor use only.
During use, extend the antenna and move it in various directions until
the clearest signal is received.
Fix it with push pins or similar implements in the position that will
cause the least amount of distortion.
If you experience poor reception quality, an outdoor antenna
may improve the quality.

Connecting the supplied AM loop antenna
The supplied AM loop antenna is for indoor use only.
Set it in the direction and position where you receive the clearest
sound.  Put it as far away as possible from the unit, televisions,
speaker cables, and power cords.
If you experience poor reception quality, an outdoor antenna may
improve the quality.

Loosen the AM antenna terminal screw counterclockwise.

Insert the bared wire into the antenna terminal.

Tighten the screw by turning clockwise to secure the wire

• Keep the antenna away from noise sources (neon signs, busy

roads, etc.).

• Do not put the antenna close to power lines.  Keep it well away

from power lines, transformers, etc.

• To avoid the risk of lightning and electrical shock, grounding is

necessary.

An outdoor antenna will be more effective if it is stretched
horizontally above a window or outside.

• Do not remove the AM loop antenna.
• To avoid the risk of lightning and electrical shock, grounding is

necessary.

MODEL NO. SR5300 

Ω)

Ω)