SMC Networks EZ CONNECT SMC2755W ユーザーズマニュアル

9

(98/2000/Me/NT/XP)

1. Insert the CD-ROM that comes with the package into the 

CD-ROM drive on your PC, and then enter the following 
command: “D:\utility\setup.” Follow the on-screen instructions 
to install the utility program.

2. After you finish the installed utility, choose “Programs,” then 

“SMC EZ Connect 802.11a,” and select “EZ Connect 802.11a 
Configuration Utility,” from the “Start” menu. 

3. The program will then detect all the SMC2755W Wireless 

Access Point(s) on the network. (Default SMC2755W IP 
address is “192.168.1.20”.)

4. If DHCP is turned “ON” (default setting is “Disable,” page 21) 

and a DHCP server is located on the network, then the Access 
Point will automatically be assigned an IP address when 
booted. From the list of detected devices (see the above 
screen), select and double-click on the unit you want to 
configure.