SMC Networks EZ CONNECT SMC2755W ユーザーズマニュアル
S
YSTEM
C
ONFIGURATION
19
Synchronization
In order to obtain transmission, the Access Point and connected
clients need to be synchronized.
clients need to be synchronized.
Beacon Interval (20-1000): Set the interval value of beacon
between synchronized frames. These synchronous frames also
contain indication of frames that need to transmit to the
power-saved stations. (Default: 100)
between synchronized frames. These synchronous frames also
contain indication of frames that need to transmit to the
power-saved stations. (Default: 100)
DTIM (1-16384): Set the Delivery Traffic Indication Message
(DTIM) interval value. The DTIM indicates how often the MAC
layer forwards multicast traffic. This parameter is necessary to
accommodate stations using Power Save mode. In order to
maximize the utilization of channels, broadcast data is not
transmitted every beacon for stations in Power Save mode. These
power-saved stations must wake up to receive broadcast data at
the DTIM interval.
(DTIM) interval value. The DTIM indicates how often the MAC
layer forwards multicast traffic. This parameter is necessary to
accommodate stations using Power Save mode. In order to
maximize the utilization of channels, broadcast data is not
transmitted every beacon for stations in Power Save mode. These
power-saved stations must wake up to receive broadcast data at
the DTIM interval.