Motion Computing M1300 取り扱いマニュアル

Chapter 4  Using Your Motion Tablet PC

Motion Computing Tablet PC User Guide 52

2. When the Motion Computing Splash Screen appears, 

quickly press Hot Key #2. If you miss the Splash 
screen, turn the Tablet PC off then back on and try this 
step again.

3. From the PhoenixBIOS Setup Utility, tap Security on the menu bar.
4. To set the hard disk password, double-tap Enter next to Set Hard 

Disk Password.

5. Type in a New Password.
6. Tap Enter.
7. Type in the password to confirm it. 
8. Tap Enter. The system returns to the Security screen and the HDD 

Password is Set. (When you exit then re-enter the PhoenixBIOS 
setup, the HDD Password is Locked.)

9. Repeat Steps 10-13 in the section “Bios System Passwords.”

To clear the Tablet PC PhoenixBIOS security:

1. Start the Tablet PC.
2. When the Motion Computing Splash Screen appears, 

quickly press Hot Key #2. If you miss the Splash 
screen, turn the Tablet PC off then back on and try this 
step again.

3. From the PhoenixBIOS Setup Utility, tap Security on the menu bar. 

If you have rebooted, you will be prompted to enter the password(s) 
you’ve set up.

4. To clear the System and Password on boot passwords, double-tap 

Enter next to Set System Password.

5. Type in the Current Password. 
6. Leave the space blank next to Enter New Password.
7. Tap Enter.
8. Leave the space blank to Confirm New Password.
9. Tap Enter.
10.When the Security screen appears, the System Password should be 

Clear and the Password on boot Disabled.

11.To clear the Hard Disk Drive password, double-tap Enter next to Set 

Hard Disk Password.

12.Type in the Current Password. 
13.Leave the space blank next to Enter New Password.
14.Tap Enter.
15.Leave the space blank to Confirm New Password.
16.Tap Enter.
17.When the Security screen appears, the HDD Password should be 

Clear.