Motion Computing M1300 ユーザーズマニュアル

Chapter 4  Using Your Motion M1200 and M1300 Tablet PCs

Motion Computing M1200 and M1300 Tablet PC User Guide 53

10.If you have finished setting up a password, tap Exit or press the Esc 

key on the Tablet PC to exit the PhoenixBIOS Setup Utility.

11.When you exit, you’re prompted to select from the 

following options:
• Exit Saving Changes
• Exit Discarding Changes
• Load Setup Defaults
• Discard  Changes
• Save Changes

12.Select the desired action.
13.Confirm the selection by double-tapping Yes.

To set up a password to start the Tablet PC (no one can access the 
information on the Hard Disk Drive of the Tablet PC even if it’s 
removed and installed in another Tablet PC without the proxy 
password):

1. Start the Tablet PC.
2. When the Motion Computing Splash Screen appears, 

quickly press Hot Key #2. If you miss the Splash 
screen, turn the Tablet PC off then back on and try this 
step again.

3. From the PhoenixBIOS Setup Utility, tap Security on the menu bar.
4. To set the hard disk password, double-tap Enter next to Set Hard 

Disk Password.

5. Type in a New Password.
6. Tap Enter.
7. Type in the password to confirm it. 
8. Tap Enter. The system returns to the Security screen and the HDD 

Password is Set. (When you exit then re-enter the PhoenixBIOS 
setup, the HDD Password is Locked.)

9. Repeat Steps 10-13 in the section “Bios System Passwords.”

To clear the Tablet PC PhoenixBIOS security:

1. Start the Tablet PC.
2. When the Motion Computing Splash Screen appears, 

quickly press Hot Key #2. If you miss the Splash 
screen, turn the Tablet PC off then back on and try this 
step again.

3. From the PhoenixBIOS Setup Utility, tap Security on the menu bar. 

If you have rebooted, you will be prompted to enter the password(s) 
you’ve set up.

4. To clear the System and Password on boot passwords, double-tap 

Enter next to Set System Password.

5. Type in the Current Password.