Marantz AV Pre Tuner AV7005 ユーザーズマニュアル
112
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
SVENSKA
Troubleshooting
If a problem should arise, first check the following:
1. Are the connections correct?
2. Is the set being operated as described in the user guide?
3. Are the other components operating properly?
If this unit does not operate properly, check the items listed in the table below. Should the problem persist,
there may be a malfunction.
In this case, disconnect the power immediately and contact your store of purchase.
1. Are the connections correct?
2. Is the set being operated as described in the user guide?
3. Are the other components operating properly?
If this unit does not operate properly, check the items listed in the table below. Should the problem persist,
there may be a malfunction.
In this case, disconnect the power immediately and contact your store of purchase.
G
GeneralH
Symptom
Cause/Solution
Page
Power does not turn
on.
on.
• Check whether the power plug is correctly inserted into the power
outlet.
7
Display is off.
• Set “Display” on the menu to something other than “OFF”.
86
Set does not operate
properly.
properly.
• Reset the microprocessor.
115
G
VideoH
Symptom
Cause/Solution
Page
No picture appears.
• Check the TV connection.
• Set the TV input correctly.
• Set the TV input correctly.
7
7
7
G
AudioH
Symptom
Cause/Solution
Page
Audio is not output.
• Check the connections for all devices.
• Check the speaker connections.
• Check whether the audio device power is turned on.
• Adjust the master volume.
• Cancel the mute mode.
• Select a suitable input source.
• Select a suitable input mode.
• Disconnect the headphones. No sound is output from the speakers
• Check the speaker connections.
• Check whether the audio device power is turned on.
• Adjust the master volume.
• Cancel the mute mode.
• Select a suitable input source.
• Select a suitable input mode.
• Disconnect the headphones. No sound is output from the speakers
or the PRE OUT connectors when headphones are connected.
7, 16 – 24
6, 49 – 51
6, 49 – 51
–
26, 62
26, 62
25, 62
26, 62
25, 62
71
98
98
No sound is
produced from
surround speaker.
produced from
surround speaker.
• Check if the surround speakers are connected to the SURROUND
terminals.
–
No sound is
produced from
surround back
speaker.
produced from
surround back
speaker.
• Set “Amp Assign” on the menu to “Normal”.
• Set “Speaker Config.” – “S.Back” on the menu to something
• Set “Speaker Config.” – “S.Back” on the menu to something
other than “None”.
• Set the surround mode to something other than “STEREO”.
78
78
78
44
No sound is
produced from front
height speaker.
produced from front
height speaker.
• Set “Amp Assign” on the menu to “Normal”.
• Set “Speaker Config.” – “F.Height” on the menu to something
• Set “Speaker Config.” – “F.Height” on the menu to something
other than “None”.
78
78
78
No sound is
produced from front
wide speaker.
produced from front
wide speaker.
• Set “Amp Assign” on the menu to “Normal”.
• Set “Speaker Config.” – “F.Wide” on the menu to something
• Set “Speaker Config.” – “F.Wide” on the menu to something
other than “None”.
78
79
79
No sound is
produced from
subwoofer.
produced from
subwoofer.
• Check the subwoofer connections.
• Turn on the subwoofer’s power.
• Set “Speaker Config.” – “Subwoofer” on the menu to “Yes”.
• If “Front” and “Center” for “Speaker Config.” are set to “Large”,
• Turn on the subwoofer’s power.
• Set “Speaker Config.” – “Subwoofer” on the menu to “Yes”.
• If “Front” and “Center” for “Speaker Config.” are set to “Large”,
and “Subwoofer Mode” is set to “LFE”, no sound may be output
from the subwoofers, depending on the input signal or selected
surround mode.
from the subwoofers, depending on the input signal or selected
surround mode.
6, 49 – 51
7
78
78, 79
DTS sound is not
output.
output.
• Set “Decode Mode” on the menu to “Auto” or “DTS”.
71
Dolby TrueHD, DTS-
HD, Dolby Digital
Plus audio is not
output.
HD, Dolby Digital
Plus audio is not
output.
• Make HDMI connections.
16
1.AV7005U_ENG.indd 112
2010/08/23 18:33:27