Marantz AV Pre Tuner AV7005 ユーザーズマニュアル

16

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

SVENSKA

• When this unit is connected to other devices with HDMI cables, connect this unit and TV also with  an 

HDMI cable.

• When  connecting  a  device  that  supports  Deep  Color  transmission,  please  use  a  “High  Speed  HDMI 

cable” or “High Speed HDMI cable with Ethernet”.

• Video signals are not output if the input video signals do not match the monitor’s resolution. In this case, 

switch the Blu-ray Disc/DVD player’s resolution to a resolution with which the monitor is compatible.

• When this unit and monitor are connected with an HDMI cable, if the monitor is not compatible with 

HDMI audio signal playback, only the video signals are output to the monitor.

• The HDMI signal is not simultaneously output to HDMI 1 and HDMI 2. Select 

the connector that you want to use in advance using “Monitor Out” (vpage 80) 
in the menu, or by pressing the 

 button on the remote control unit or the 

 button on the main unit. 

• HDMI control function is only supported for the HDMI OUT 1 connector. In order 

to use the HDMI control function, connect the television to the HDMI OUT 1 
connector.

• The audio signal from the HDMI output connector (sampling frequency, number 

of  channels,  etc.)  may  be  limited  by  the  HDMI  audio  specifications  of  the 
connected device regarding permissible inputs.

• The front panel HDMI input connector is displayed as “HDMI6” in the “Input 

Setup” – “Input Assign” (vpage 68) in the menu.

When an HDMI/DVI conversion cable (sold separately) is used, the HDMI video signals are converted to 
DVI signals, allowing connection to a device equipped with a DVI-D connector.

• No sound is output when connected to a device equipped with a DVI-D connector. Make separate audio 

connections.

• Signals cannot be output to DVI-D devices that do not support HDCP.
• Depending on the combination of devices, the video signals may not be output.

n

Set as necessary. For details, see the respective reference pages.

Input Assign (vpage 68)

Set this to change the HDMI input connector to which the input source is assigned.

HDMI Setup (vpage 80)

Make settings for HDMI video/audio output.

• RGB Range

• Auto Lip Sync

• HDMI Audio Out

• Monitor Out

• HDMI Control

• Standby Source

• Power Off Control

The audio signals output from the HDMI connectors are only the HDMI input signals.

HDMI cable

• This interface allows transfer of digital video signals and digital audio signals over a single HDMI cable.

OUT

HDMI

OUT

HDMI

OUT

HDMI

OUT

HDMI

OUT

HDMI

IN

HDMI

IN

HDMI

G

Rear panelH

G

Front panelH

OUT

HDMI

1.AV7005U_ENG.indd   16

2010/08/23   18:32:12