Freedom9 USB ユーザーズマニュアル

  

  

4

5.  Insert the hard drive and connector into the enclosure and push inward until the connector is 

flush with the casing (Figure 4). 

 

6.  Screw both screws back into the enclosure (Figure 1). 

7.  Connect one end of the included USB cable to the freeStor Mini 210, and connect the other 

end to a USB port on your computer (Figure 5). 

 

Note: If your hard drive does not power on after connecting the freeStor Mini 210 
to your computer, it may mean that your hard drive requires more power than a 
single USB port can deliver. Plug the USB power cable into the power jack on the 
unit, and connect the other end to a USB port on your computer. 

1.  Remove the freeStor Mini 310 hard drive enclosure from the package. 

2.  Unscrew the two screws on each side of the enclosure (Figure 6). 

Warning: After unscrewing the two screws, both ends will become loose and 
may fall out if the unit is held vertically.