Bosch MUM6N10UC オーナーマニュアル
20
How to Use Blender
The blender has been designed for crushing
ice; mixing liquids; pureeing vegetables;
preparing special diet and infant foods;
pulverizing fruit, vegetables, nuts and dried
bread (for bread crumbs); and preparing
mayonnaise and sauces.
ice; mixing liquids; pureeing vegetables;
preparing special diet and infant foods;
pulverizing fruit, vegetables, nuts and dried
bread (for bread crumbs); and preparing
mayonnaise and sauces.
Before beginning to use this or any other
attachment, make sure that the power unit is
on a clean, smooth, suitable work surface
and switched to Off position “0/off”, and that
you have removed the motor drive cover.
attachment, make sure that the power unit is
on a clean, smooth, suitable work surface
and switched to Off position “0/off”, and that
you have removed the motor drive cover.
1. Before using the blender for the first
time, it is recommended that the
blender jar cover, closure/funnel and
blade/base assembly be washed.
All components, except the blade/
base assembly, are dishwasher safe.
Remove the blade/base assembly
from the blender, see figure 9.
blender jar cover, closure/funnel and
blade/base assembly be washed.
All components, except the blade/
base assembly, are dishwasher safe.
Remove the blade/base assembly
from the blender, see figure 9.
The blade/base assembly may be easily
removed by inverting the blender and using
the blender cover to fit over the tabs on the
blade/base assembly.
removed by inverting the blender and using
the blender cover to fit over the tabs on the
blade/base assembly.
Turn it counterclockwise until it stops, see
figure 10a, and then lift up, figure 10b.
figure 10a, and then lift up, figure 10b.
Figure 10
2. To assemble or reassemble blade/
base assembly into the blender, insert
the blade/base assembly into the
blender jar and press down on the
blade/base assembly. Turn clockwise
to the stop, see figure 11.
the blade/base assembly into the
blender jar and press down on the
blade/base assembly. Turn clockwise
to the stop, see figure 11.
The blade/base assembly is then back
in place.
in place.
Figure 11
3. If you have not already done so,
move the motor drive cover to the
high-torque drive. See figure 12.
high-torque drive. See figure 12.
Figure 12
m
CAUTION
m
Blade/base assembly is very sharp.
Handle with care.
Handle with care.