Whirlpool WET4027EW インストール手順

Do not cut yellow strap. Pull yellow strap firmly, until completely 

removed from washer/dryer. There should be 2 cotter pins on 

the end of the shipping strap. Remove the hang tag and pin 

from the vent pipe.

Tilt the washer/dryer forward. Move each of the 2 rear legs in 

an up-down motion to check the self-adjusting leveling legs 

for free movement. This is required for proper leveling. Gently 

lower the washer/dryer to the floor.

Remove Shipping Strap (27" models)

To avoid floor damage, set washer/dryer onto cardboard before 

moving across floor. Move washer/dryer close to its final location.

Cut the shipping strap about 16" (406 mm) from the plug end. 

Look for the words “CUT HERE.” Discard end with cotter pins. 

You will use the remaining piece of shipping strap to secure 

the drain hose.

CUT 

HE

RE