Whirlpool WTW7000DW 使用とお手入れ

Control Panel and Features

Not all features and cycles are available on all models.

NOTE: The control panel features a sensitive surface that responds to a light touch of your finger. To ensure your selections are 

registered, touch the control panel with your finger tip, not your fingernail. When selecting a setting or option, simply touch its name 

until the desired section is illuminated.

Touch to turn the washer ON. Touching once while the 

washer is on will cancel the current cycle, touching twice  

will turn the washer OFF.

First select a cycle from the “What to Wash” and then  

select the “How to Wash” to get the best combination  

cycle available for the type of items you are going to  

wash. See “Cycle Guide” for cycle details.

Touch and hold START/PAUSE to begin the selected cycle; 

touch again to pause a cycle. 

The Estimated Time Remaining display shows the time 

required for the cycle to complete. Factors such as load  

size and water pressure may affect the time shown in 

the display. Tightly packed loads, unbalanced loads, or 

excessive suds may cause the washer to adjust the cycle 

time, as well. 
If you have set a delay start to the cycle, the Estimated  

Time Remaining display will show the delay time adjusted.  
When the cycle is complete, the Done indicator will light  

until the lid is opened. 

When Add Garment is lit, you may pause the washer, 

open the lid, and add items. Touch and hold START to 

start the washer again.