Moen L4701X 仕様ガイド
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION
• Chrome plated metal construction with various finishes
• Chrome plated metal construction with various finishes
identified by suffix
• 1/2" connections
OPERATION
• Pivot action lever style handle
• Temperature controlled through 180˚ degree arc
OPERATION
• Pivot action lever style handle
• Temperature controlled through 180˚ degree arc
of handle travel
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,
for products made before October 2008 flow is limited to
2.2 gpm max (8.3 L/min)
2.2 gpm max (8.3 L/min)
CARTRIDGE
• 1225 cartridge design
• Nonmetallic/nonferrous and stainless steel material
• Can accommodate reversed piping and back to
• 1225 cartridge design
• Nonmetallic/nonferrous and stainless steel material
• Can accommodate reversed piping and back to
back installations
STANDARDS
• Third party certified to WaterSense,® CSA B-125, ASME
• Third party certified to WaterSense,® CSA B-125, ASME
A112.18.1M, ANSI A117.1 and all applicable requirements
referenced therein
referenced therein
• Certified to ANSI/NSF 61/9
• Complies with California Proposition 65 and with
• Complies with California Proposition 65 and with
the Federal Safe Water Drinking Act
• ADA
for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and
• Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
VILLETA
™
Single-Handle Chrome Lavatory Faucet
Models: L4701, L84701
Bulk Pack (12 per carton)
Models: L64702, L64703
NOTE: THIS FAUCET IS DESIGNED TO BE
INSTALLED THRU 3-1" DIA. HOLES, 4" ON CENTER
Rev. 6/08
2-13/16"
2-3/8"
(60mm)
5"
(127mm)
7"
(178mm)
SPACER
PROVIDED –
DISCARD IF
MOUNTING
SURFACE IS
MORE THAN
3/4" THICK
1-3/4"
(45mm)
MAX.
2"
(25mm)
1/2" IPS
ADAPTER
2"
(25mm)
TOP OF
MOUNTING
SURFACE
6" (152mm)
(ESCUTCHEON WIDTH
3-5/8"
(92mm)