Frigidaire FCFS181LQB オーナーマニュアル

ページ / 12
7
Care and Cleaning
Interior Light 
(stainless steel door models)
The stainless steel door models are equipped 
with a 40-watt bulb that lights up when the 
door is opened. If the bulb goes bad, replace 
with bulb of the same type and wattage. This 
is a special bulb with a shatterproof coating. 
Use only an NSF-certified bulb of the same type 
and wattage which can be ordered from your 
Frigidaire Commercial Service Center by calling 
1-866-738-1640.
Cleaning the Interior
Be sure to turn the temperature control to 
“OFF” and unplug the electrical cord. Wash 
the inside surface of the storage area with 
solution of 1 tbsp. (12 g) of baking soda 
in 1 qt. (1 l) warm water.
 Rinse thoroughly 
with clean, warm water and wipe dry.
NSF Certified Temperature Gauge
This appliance is equipped with an NSF-
certified temperature gauge to display cabinet 
internal temperature. The temperature 
gauge is located on the top right side of the 
evaporator housing inside the unit.
Fluorescent Lamp 
(glass door models)
The Glass Door Refrigerator is equipped with 
a 17 watt fluorescent lamp. A ballast – lamp 
mismatch may result in poor or no lighting.
If the lamp fails, replace with a lamp of the 
same type and wattage. Also, replace a lamp 
that flickers continuously. This could damage 
the ballast.
Turning the light off, when not in use, will save 
energy. However, frequent ON-OFF cycling will 
reduce the lamp life.
Use only NSF certified lamp which can be 
ordered from your Frigidaire Commercial 
Service Center by calling 1-866-738-1640.
Cleaning the Exterior
Wipe the cabinet exterior occasionally with a 
cloth dampened in mild detergent and water. 
Rinse and wipe dry with a soft cloth. Do not 
use razor blades or other sharp instruments 
that can scratch the appliance surface when 
removing adhesive labels. Any glue left from the 
tape can be removed with a mixture of warm 
water and mild detergent or touch the residue 
with the sticky side of tape already removed. 
DO NOT REMOVE THE SERIAL PLATE.
Condensate Pan
Some models have a condensate pan in a fixed 
position located behind the toe grill. This must not 
be removed from under the cabinet. If the pan is 
removed, condensate will drop onto the floor.
Features