Frigidaire FFHT1814QW オーナーマニュアル

12

Your ice maker is shipped from the factory 

with the wire signal arm in the ON position. 

To ensure proper function for your ice maker, 

hook up water supply immediately or turn ice 

maker OFF by lifting the wire signal arm until 

it clicks and locks in the UP position. If the 

ice maker is on and the water supply is not 

connected, the water valve will make a loud 

chattering noise.

The ice maker will produce 2.5 to 3 pounds 

of ice every 24 hours depending on usage 

conditions. Ice is produced at a rate of 8 cubes 

every 80 to 160 minutes.

Do Not place the ice container in your 

dishwasher.

If your refrigerator has an automatic ice maker, 

minimal ice will be produced during the first 24

hours of operation. Air in new plumbing lines 

may cause the ice maker to cycle two or three 

times before making a full tray of ice. With no 

usage, it will take approximately one to two 

days to fill the ice container.
New plumbing connections may cause the first

production of ice cubes to be discolored or 

have an odd flavor. Discard ice made during

the first 24 hours.



Automatic ice makers are also optional 

accessories that may be installed in most 

models at any time. Call your local dealer for 

information.

After the plumbing connections have been 

completed, the water supply valve must be 

opened. Place the ice container under the 

ice maker, pushing it as far back as possible. 

Lower the wire signal arm to its “down” or ON 

position.

To stop the ice maker, lift the wire signal 

arm until it clicks and locks in the “up” or 

OFF position. The ice maker also turns off 

automatically when the ice container is full.

Wire

Signal Arm