Frigidaire FGRU19F6QF オーナーマニュアル

14

Multi-position adjustable slide out glass shelves 

can be moved to any position for larger or 

smaller packages. The shipping spacers that 

stabilize the shelves for shipping may be removed 

and discarded.
To Adjust The Shelves

•  Lift front edge up.
•  Pull shelf out.
•  Replace the shelf by inserting the hooks 

at rear of the shelf into the wall bracket.  

Lower the shelf into the desired slots and 

lock into position.

The upper level lighting comes on automatically 

when the door is opened. 
To replace the light bulbs:

To disconnect power to the unit, unplug the 

unit or switch the breaker that supplies power 

to the unit to the off position. Replace the old 

bulb with a bulb of the same wattage.

1. To replace the light bulb, turn the 

temperature control to OFF and unplug the 

electrical cord. 

2. Remove the light shield by pushing in on 

the sides where the two tabs are located in 

the back, then rotate the light shield down 

and out.  

3. Replace the old bulb with a bulb of the same 

type and wattage. 

4. When replacing the light shield, insert the 

three tabs in the front of the light shield into 

the slots in the control box and then rotate 

the rear upward until the two retaining 

latches lock into place.   

puerta entreabier ta

corte de energí a

reemplace el filtro de aire

mantenga presionado 

para reinicia r

mantener  

presionado

Light Shield

Light Sheld Tabs

Insert into

slots

This model is equipped with a Deli

 

Drawer for 

storage of luncheon meats, spreads, cheeses, 

and other deli items.

Deli Drawer Cover

The crisper drawer, located at the bottom of the 

refrigerator interior, is designed for storing fruits, 

vegetables, and other fresh produce. Wash items 

in clean water and then remove excess water 

before placing them in the crisper. Items with 

strong odors or high moisture content should be 

wrapped before storing. Dividers may be adjusted 

for different size items within the crisper.