Frigidaire FGRU19F6QF オーナーマニュアル

ページ / 24
19
BEFORE YOU CALL
PROBLEM
CAUSE
CORRECTION
APPLIANCE OPERATION
Appliance 
does not run.
•  Appliance is plugged into a 
circuit that has a ground  
fault interrupt.
•  Temperature Control is in the 
OFF position.
•  Appliance may not be 
plugged in or plug is loose.
•  House fuse blown or tripped   
circuit breaker.
•  Power outage.
•  Use another circuit. If you are unsure  
about the outlet, have it checked by a 
certified technician.
•  See ELECTRONIC CONTROL section. 
•  Ensure plug is tightly pushed into outlet. 
•  Check/replace fuse with a 15-amp time-delay 
fuse. Reset circuit breaker.
•  Check house lights. Call local electric company.
Appliance  
runs too much 
or too long.
•  Room or outside weather  
is hot.
•  Appliance has recently been 
disconnected for a period  
of time.
•  Large amounts of warm  
or hot food have been  
stored recently.
•  Door is opened too frequently 
or too long.
•  Door may be slightly open.
•  Temperature control is set  
too low.
•  Gaskets are dirty, worn, 
cracked, or poorly fitted.
•  It’s normal for the appliance to work longer 
under these conditions.
•  It takes 24 hours for the appliance to cool  
down completely. 
•  Warm food will cause appliance to run more 
until the desired temperature is reached. 
•  Warm air entering the appliance causes it to 
run more. Open door less often.
•  See “DOOR PROBLEMS”.
•  Turn control knob to a warmer setting. Allow 
several hours for the temperature to stabilize.
•  Clean or change gasket. Leaks in door seal 
will cause appliance to run longer in order to 
maintain desired temperatures.
APPLIANCE TEMPERATURES
Interior ap-
pliance  tem-
perature is 
too cold.
•  Temperature control is set 
too low.
•  Set control to a warmer setting. Allow several 
hours for temperature to stabilize.
Temperature 
inside appli-
ance is too 
warm.
•  Temperature control is set  
too warm.
•  Door is opened too frequently 
or too long.
•  Door may not be seating properly.
•  Large amount of warm or hot 
food has been stored recently.
•  Appliance has recently been dis-
connected for a period of time.
•  Turn control to a colder setting. Allow several 
hours for temperature to stabilize.
•  Warm air enters the appliance every time the 
door is opened. Open door less often.
•  See “DOOR PROBLEMS”.
•  Wait until the appliance has had a chance to 
reach its selected temperature.
•  Appliance requires 24 hours to cool  
down completely.
“LO” is  
displayed on
control.
•  Control has been locked.
•  Press the CONTROL LOCK key for three 
seconds to unlock.
“E7”, “E8”, 
“E9” is
displayed on 
control.
•  The control has registered an 
error code.
•  For toll-free telephone support in the U.S. 
and Canada: 1-800-374-4432
Visit our web site at 
www.frigidaire.com.
1-800-944-9044 (United States)
1-800-265-8352 (Canada)
Before calling for service, review this list. It may save you time and expense. This list includes com-
mon occurrences that are not the result of defective workmanship or materials in this appliance.