KitchenAid KBSD602ESS-SS 使用とお手入れ

2.  Push the top grille straight up, then pull straight out. Lay the 

grille on a soft surface.

1.  Insert top grille hooks (located on the back of the top grille) 

onto mounting bolts on the side trim.

2.  Pull grille down slightly to lock into place.

1.  Remove top grille.
2.  Press Power switch to the ON or OFF position.
3.  Replace top grille.

IMPORTANT: Be sure the power switch is set to the ON position 

after cleaning refrigerator or changing light bulbs.

Using the Controls

 

■

The refrigerator control adjusts the refrigerator compartment 

temperature. The freezer control adjusts the freezer 

compartment temperature.

 

■

Wait 24 hours after you turn on the refrigerator before you put 

food into it. If you add food before the refrigerator has cooled 

completely, your food may spoil.

NOTE: Adjusting the refrigerator and freezer controls to a 

lower (colder) setting will not cool the compartments any 

faster.

 

■

If the temperature is too warm or too cold in the refrigerator 

or freezer, first check the air vents to be sure they are not 

blocked before adjusting the controls.

 

■

The preset settings should be correct for normal household 

usage. The controls are set correctly when milk or juice is as 

cold as you like and when ice cream is firm.

 

■

The actual temperature may differ from the display when a 

door is open for an extended period of time.

NOTE: The factory recommended set points are 0°F (-18°C) for 

the freezer and 37°F (3°C) for the refrigerator.

 

■

Press the Cooling (ON/OFF) touch pad.

 

■

After the refrigerator is turned on, the Over Temperature audio 

alarm and indicator light may activate every 1¹⁄₂ hours until the 

refrigerator and freezer temperatures are below 48°F (9°C) and 

15°F (-9°C), respectively, or until the alarm is turned off. To 

turn off the audio alarm and indicator light, see “Master Alarm 

Reset.”

 

■

The Cooling ON/OFF touch pad on the control panel shuts 

down refrigerator functions such as cooling, lighting, fans and 

compressors. To turn the power off completely, use the power 

ON/OFF switch located behind the top grille. See “Power On/ 

Off Switch.”

 

■

Press the F/C touch pad. To redisplay degrees Fahrenheit, 

press F/C again.

NOTE: If the freezer temperature is below zero, the negative sign 

next to the freezer display will light up. This is normal.

NOTE: Wait at least 24 hours between adjustments. Recheck the 

temperatures before other adjustments are made.
To Adjust Set Point Temperatures:

 

■

Press the refrigerator or freezer PLUS (+) or MINUS (-) touch 

pad until the desired temperature is reached.

 

■

Press the Set To Recommended touch pad to reset the set 

points to the factory recommended temperatures.

NOTE: The set point range for the freezer is -5°F to 3°F (-21°C 

to -16°C). The set point range for the refrigerator is 34°F to 

42°F (1°C to 6°C).

REFRIGERATOR too cold
Not set correctly for conditions

REFRIGERATOR Control 

1° higher

REFRIGERATOR too warm
High use or room very warm

REFRIGERATOR Control 

1° lower

FREEZER too cold
Not set correctly for conditions

FREEZER Control 

1° higher

FREEZER too warm/too little ice
High use or heavy ice use

FREEZER Control 

1° lower